What to Expect While Cleaning Your Grease Trap?

A grease trap is plumbing devise that prevents FOG (fats, oil, and grease) from entering the pipes of the plumbing system and hence grease trap cleaning ( www.draneranger/Grease-Trap-Cleaning-Service ) must be a regular activity. These are generally installed in restaurants and large kitchens such as those of schools and hospitals. However, a grease trap is also installed in households with a septic tank, airports, shopping malls, and production units.

Why grease traps should be cleaned?

•  Prevention is better than cure and this literally holds true for grease traps because of all the waste that passes through it every day. Regular cleaning keeps the plumbing system run smoothly and efficiently.

•  The efficiency of kitchen, bathrooms and washing area on the property decreases if there is clogging in the grease trap.

•  Blocked grease trap not only cause trouble to the plumbing system but the waste accumulation and gas release are unhealthy and harmful for people on the property.

•  Regular grease tank cleaning keeps it safe and free from fines and penalties that may come from the regulatory authority.

When should grease trap be cleaned?

•  A grease trap should be cleaned after every 4 to 6 weeks as a regular cleaning practice. The maintenance cycle should be recorded and informed to the concerned person.

•  If there is foul smell or odor near a sink or bathroom area then it is a sign to clear the trap inside the grease trap.

•  In case there is slow drainage than normal, it is an indication of clogging in a grease trap that should be removed immediately.

How is the grease trap cleaned?

•  Cleaning the grease trap is a time-consuming task that needs patience more than expertise. Unlike the septic tank, no special equipment is required, a scoop and a bucket can do it all.

•  The cover or the lid of the grease trap is open with care so that the gaskets on it may not be damaged. The gaskets are present right below the lid and help in sealing it. If gaskets are damaged, they should be replaced and the broken or tampered gaskets should not be re-installed.

•  After the lid is removed, the amount of trap is measured. It is done by using a ruler or a stick in case the ruler is not available.

•  A grease trap is then cleared of all the water with the help of a small pump or a bucket.

•  The trap is removed from with the help of a scoop or by hands with rubber gloves on.

•  Freshwater is then poured to rinse off the trap left behind and the grease trap is ready for the use.

For those who take the job in their own hands, following things should be taken care while grease trap cleaning ( ):

•  Face should be covered with the gas mask because the waste deposit produces different types of gas.

•  One must use rubber gloves while removing the trap.

•  Coverall should be worn to protect clothes while cleaning the grease trap.

Comments for this post were locked by the author